Faculty of Civil Engineering

Education

• PhD. Civil Engineering, Department of  Materials & Structures, Universiti Teknologi Malaysia (UTM), Malaysia
• PGCOC (Postgraduate Computer Orientation Course) CTC – Islamabad, Pakistan
• M.E. Structural Engineering, Mehran University of Eng. & Tech. (MUET), Jamshoro, Pakistan
• B.E. Civil Engineering, Mehran University of Eng. & Tech. (MUET), Jamshoro, Pakistan

List of Reseach Publications of Dr. Abdullah Saand:      

 International / HEC Recognized (Impact Factor / W Category Journal Papers):

1. Keerio, M.A., Saand, A., Chaudhry, R., Bheel N, Bhatti N. K. & Sohu S., (2022), ‘The Effect of Local Metakaolin Developed from Natural Material Soorh on Selected Properties of Concrete/Mortar’, Silicon, Vol. 14, pp. 1807–1816. (IF = 2.941) https://doi.org/10.1007/s12633-021-00993-w
2. Mukhtiar Ali Soomro, Dildar Ali Mangnejo, Abdullah Saand & Naeem Mangi, (2022), ‘3D numerical analysis of a masonry façade subjected to excavation- induced ground deformation’, International Journal of Geotechnical Engineering, Vol. 16, No. 7, pp. 865-877, (IF = 1.740) https://doi.org/10.1080/19386362.2021.1937853
3. Mukhtiar Ali Soomro, Dildar Ali Mangnejo, Abdullah Saand & Yi Hong (2022), ‘Responses of a masonry façade to multi-propped deep excavation-induced ground deformations: 3D numerical parametric study’, European Journal of Environmental and Civil Engineering, Vol. 26, No.12, pp. 5983-6011. (IF = 2.516) https://doi.org/10.1080/19648189.2021.1926336
4. Mukhtiar Ali Soomro, Saleem Raza Samo, Abdullah Saand, Naeem Mangi & Dildar Ali Mangnejo (2022), ‘Numerical Parametric Study of Settlement and Load Transfer Mechanism of Pile Group Due to Twin Stacked Tunnelling with Different Construction Sequences’, European Journal of Environmental and Civil Engineering, Vol. 26, No. 3, pp. 1064-1096, (IF = 2.516) https://doi.org/10.1080/19648189.2019.1695678
5. Zaffar, Suhail, Aneel Kumar, Naeem Aziz Memon, Rabinder Kumar & Abdullah Saand (2022), ‘Investigating Optimum Conditions for Developing Pozzolanic Ashes from Organic Wastes as Cement Replacing Materials’, Materials Vol. 15, No. 6, 2320, (IF = 3.748). https://doi.org/10.3390/ma15062320
6. Manthar Ali Keerio, Abdullah Saand, Aneel Kumar, Naraindas Bheel & Karam Ali, (2021), ‘Effect of local metakaolin developed from natural material Soorh and coal bottom ash on fresh, hardened properties and embodied carbon of self-compacting concrete’ Environmental Science and Pollution Research, Vol. 28, pp. 60000–60018. (IF = 4.223) https://doi.org/10.1007/s11356-021-14960-w
7. Abdullah Saand, Karam Ali, Aneel Kumar, Naraindas Bheel & Manthar Ali Keerio, (2021) ‘Effect of metakaolin developed from natural material Soorh on fresh and hardened properties of self-compacting concrete’ Innovative Infrastructure Solutions, Vol. No. 6, Article number: 166 (IF = 1.965) https://doi.org/10.1007/s41062-021-00534-9
8. Tariq Ali, Abdullah Saand, Daddan khan Bangwar, Abdul Salam Buller & Zaheer Ahmad (2021), ‘Mechanical and Durability Properties of Aerated Concrete Incorporating Rice Husk Ash (RHA) as Partial Replacement of Cement’, Crystals, Vol. 11, No. 6. pp. 1-13. (IF= 2.670) https://doi.org/10.3390/cryst11060604
9. Mukhtiar Ali Soomro, Abdullah Saand, Naeem Mangi, Dildar Ali Mangnejo, Hemu Karira & Kai Liu (2021), ‘Numerical modelling of effects of different multipropped excavation depths on adjacent single piles: comparison between floating and end-bearing pile responses’, European Journal of Environmental and Civil Engineering, Vol. 25, No. 14, pp. 2592-2622, (IF = 2.516), https://doi.org/10.1080/19648189.2019.1638312
10. Mukhtiar Ali Soomro, Dildar Ali Mangnejo, Abdullah Saand, Naeem Mangi & Muhammad Auchar Zardari (2021), ‘Influence of stress relief due to deep excavation on a brick masonry wall: 3D numerical predictions’, European Journal of Environmental and Civil Engineering, (IF = 2.516) https://doi.org/10.1080/19648189.2021.2004450
11. Saand, A., Zardari, M., Keerio, M., Shaikh, S., Bangwar, D. (2020). ‘Suitability of brick kiln waste as a stabilizer for clayey soils’, Scientia Iranica, Vol. 27, No. 5, pp. 2258-2263. (IF= 1.435) https://doi.org/10.24200/sci.2018.50198.1569
12. K. BANGWAR, Abdullah SAAND, M.A. KEERIO, M.A.ZARDARI, (2020), ‘A new approach to improve durability of rice husk ash blended concrete with re-dispersible polymer powder’, Scientia Iranica, Transactions: Civil Engineering (A), Vol. 27, No. 4. (IF = 1.435) https://dx.doi.org/10.24200/sci.2018.21079
13. K. BANGWAR, Abdullah SAAND, M.A. BHUTTO, M.A.ZARDARI, M.A. KEERIO (2019),‘Reducing the Effect of Carbonation and Corrosion in Rice Husk Ash Concrete by incorporating Polymer’, The journal Tehnički vjesnik/Technical Gazette, Vol. 26, No. 3  (IF = 0.686) https://doi.org/10.17559/TV-20170906095149
14. SAAND, M.A. Keerio, D.K. Bangwar and M.K. Samo (2016), ‘Development of Metakaolin as a Pozzolanic Material from Local Natural Material, Soorh’, Arabian Journal of Science and Engineering, Vol. 41, No.12, pp. 4937-4944. (IF = 0.865)
15. A. Lakho, M. A. Zardari, M. Memon and A. SAAND (2015), ‘Design and fabrication of mechanized system for casting and compacting laboratory-size clay beams’, Scientia Iranica, Transaction A: Civil Engineering, Elsevier, Vol. 22, No. 6, pp. 2046-2051. ISSN: 1026-3098     (IF = 1.025)

 International /  HEC Recognized Journal Papers (X/Y Category):

16. Imran Ali Channa & Abdullah Saand (2021), ‘Mechanical Behavior of Concrete Reinforced with Waste Aluminium Strips’, Civil Engineering Journal, Vol. 7, No. 07, pp. 1169-1182. http://dx.doi.org/10.28991/cej-2021-03091718  X – Category
17. Saand, Karam A. Jamali, M. A. Keerio, T. Ali, and N. Bhatti, (2019) “Effect of Metakaolin Developed from Local Soorh on Fresh Properties and Compressive Strength of Self-Compacted Concrete”, Engineering Technology & Applied Science Research (ETASR), Vol. 9, No. 6, pp. 4901–490 http://doi.org/10.48084/etasr.3152  Y – Category
18. Saand, T. Ali, M. A. Keerio, and D.K. Bangwar, (2019) “Experimental study on the use of Rice Husk Ash as partial Cement replacement in Aerated Concrete”, Engineering Technology & Applied Science Research (ETASR), Vol. 9, No. 4, pp. 4534-4537. Y – Category
19. K. Bhatti, S.R. Samo, A. Saand, M.A. Keerio and A. Ali (2018), ‘Ground water quality assessment of Daur, Taluka Shaheed Benazir Abad’, Engineering Technology & Applied Science Research (ETASR), Vol. 8, No. 2, pp. 2785-2789. Y- Category
20. SAAND, M.A. Keerio and D.K. Bangwar (2017), ‘Effect of Metakaolin from Local Natural Material Soorh on Workability, Compressive Strength, Ultra pulse velocity and Drying shrinkage of Concrete’, Journal of Architecture, Civil and Environmental Engineering (ACEE), Poland, Vol. 10, No.2, pp. 115-122. ISSN: 1899-0142 (ESC Index Thomson Reuters, Index Copernicus) https://doi.org/10.21307/acee-2017-025 Y – Category
21. SAAND, M.A. Keerio, R. Juj, S. Khoso and D.K. Bangwar (2017), ‘Utilization of Waste Glass a Partial Replacement of Fine Aggregate in Concrete’, Engineering, Science and Technology International Journal (ESTIRJ), Vol. 1, No.1, pp. 28-31. ISSN: (e) 2520-7393 (p) 2521-5027 (Index-ROAD, Library of Congress (USA))    

22. SAAND, M.A. Keerio, and D.K. Bangwar (2017), ‘Effect of Soorh Metakaolin on Concrete Compressive Strength and Durability’, Engineering, Technology and Applied Science Research (ETASR), Vol. 7, No. 6, pp. 2210-2214. ISSN: 2241-4487 (ESC Index Thomson Reuters, Index Copernicus) https://doi.org/10.5281/zenodo.1118300 Y- Category
23. K. Bangwar, A. SAAND, M.A. Keerio, M.A. Soomro and N.K. Bhatti (2017), ‘Development of an Amorphous silica from Rice Husk Waste’, Engineering, Technology and Applied Science Research (ETASR), Vol. 7, No. 6, pp. 2184-2188. ISSN: 2241-4487 (ESC Index Thomson Reuters, Index Copernicus) Y- Category
24. K. Bangwar, A. SAAND and M.A. Keerio (2017), ‘Effect of Methylcellulose Admixture on Durability Properties of Rice Husk Ash Polymer Modified Concrete: a new approach’, Engineering, Science and Technology International Journal (ESTIRJ), Vol. 1, No.1, pp. 38-42. ISSN: (e) 2520-7393 (p) 2521-5027 (Index-ROAD, Library of Congress (USA))
25. K. Bangwar, A. SAAND and M.A. Keerio (2017), ‘Rice Husk Ash as a Potential Supplementary Cementing Material’, Engineering, Science and Technology International Journal (ESTIRJ), Vol. 1, No.1, pp. 72-76. ISSN: (e) 2520-7393 (p) 2521-5027 (Index-ROAD, Library of Congress (USA))
26. A. Akhund, A. SAAND, U. Memon and S.J. Oad (2017), ‘Utilization of Soft drink Tins as Fiber Reinforcement in Concrete’, Engineering Science and Technology International Journal (ESTIRJ), Vol.1, No.2, June, pp. 47-52. ISSN: (e) 2520-7393 (p) 2521-5027 (Index-ROAD, Library of Congress (USA))
27. K. Bangwar, A. SAAND, M.A. Keerio, M.A. Soomro and A.N. Leghari (2017), ‘Replacement of Coarse Aggregate with Locally Available Brick Aggregate’, Engineering, Technology and Applied Science Research (ETASR), Vol. 7, No. 6, pp. 2266-2267. ISSN: 2241-4487 (ESC Index Thomson Reuters, Index Copernicus) Y- Category
28. R. Samo, N.K. Bhatti, M.A.A. Beg, A. SAAND and M.A. Kerio (2017), ‘Temporal Analysis of Temperature and Precipitation Trends in Shaheed Benazir Abad, Sindh, Pakistan’, Engineering, Technology and Applied Science Research (ETASR), Vol. 7, No. 6, pp. 2171-2176. ISSN: 2241-4487 (ESC Index Thomson Reuters, Index Copernicus) Y- Category
29. SAAND, M. S. Afridi, M. A. Kerio and D. K. Bangwar (2016), ‘Mechanical Properties of Concrete Reinforced with Steel Fibers extracted from Waste Tyres’, Science International (Lahore), Vol.28, No.4, pp. 3877-3880. (Thomson Reuters – ISI Index)

30. SAAND, D. K. Bangwar and M. A. Kerio, M. K. Samo (2016), ‘Effect of Methyl cellulose on Mechanical Properties of Rice Husk Ash Polymer Modified Rice Husk Ash Concrete’, Science International (Lahore), Vol. 28, No.4, pp. 3873-3876. (Thomson Reuters – ISI Index)

31. SAAND, M. A. Kerio, S.H. Jakhrani and D. K. Bangwar (2016), ‘Development of cement replacement material / pozzolana from waste paper sludge’, Science International (Lahore), Vol. 28, No. 6, pp. 5277-5283. (Thomson Reuters – ISI Index)

32. K. Bangwar, A. SAAND and M.A. Keerio (2016), ‘Flexural Behaviour of Rice Husk Ash Polymer-modified Reinforced Concrete Beams’, Science International (Lahore), Vol. 28, No. 5, pp. 4671-4675. (Thomson Reuters – ISI Index)
33. SAAND, D. K. Bangwar and M. A. Kerio (2015), ‘Development of Polymer Modified Rice Husk Ash Concrete (PMRHAC)’, Journal of Advanced Materials Research, Tans Tech Publications, Switzerland, Vol.1129, pp. 500-507. ISSN: 16628985, 10226680. (Index – Scopus, Ei Conpendex, CSA, ISI)
34. E. Ismail, M. Ismail and A. SAAND (2008), ‘Tensile Strength Behaviour of Concrete Modified with Ready-Mixed Polymer Modified Mortar’, Al-Azhar University Engineering Journal, JAUES, December, Vol 3, No. 10, pp. 766-772. (Index Copernicus Egypt).
35. SAAND A., M. Ismail, and S.R. Sumadi (2007), ‘Influence of Prepackaged Polymer-Modified Mortar (PPMM) as a Modifier on Strength of Concrete’. Journal of Applied Sciences. Vol. 7, No. 24, pp. 4023-4027. ISSN: (e)1812-5662 (p)1812-5654 (Scopus Indexed, ISI Index, CAS) Y- Categoy.

National / HEC Recognized Journal Papers (X/Y Category):

36. Bala Muhammad and SAAND (2015), ‘Performance optimization of Elastomeric Latexes in cement concrete production’, Journal of Science, Technology and Development, Pakistan Council of Science and Technology, Pakistan, Vol. 34, No.4, pp. 232-241. ISSN: 0254-6418.
37. Pirzada G.B., SAAND and N.A. Durrani (2000), ‘Minimum Cost Design of Rectangular Reinforced Concrete Sections Using System Simulation’, Quaid-e-Awam University Research Journal of Engineering Science & Technology, Nawabshah, Vol.1, No.1, January-June.
38. SAAND A., B.A. Memon and S.D. Jokhio (2000), ‘Quality Evaluation of Red Clay Bricks Available in the Vicinity of Nawabshah Region’, Quaid-e-Awam University Research Journal of Engineering Science & Technology, Nawabshah, Vol.1, No.2, July-December.
39. Samo S.R., H.B. Mari and SAAND (2000), ‘Prediction of the Cooling Energy Requirement in Buildings Using the Degree Days Method’. Mehran University Research Journal of Eng.: & Tech, Vol.19, No.2, April.
40. M.H. Talpur and A. SAAND (2000), ‘Reliability of Locally Manufactured Steel Bars as Reinforcing Material for RC Construction’, Journal of Eng. and Applied Sciences, Vol. 19, No. 2, NWFP University of Eng. & Tech., Peshawar, July-December
41. M.H. Talpur, A. SAAND and A.G. Memon (2000), ‘Further Reliability of Scrap Steel Bars as Reinforcing Material for RC Construction’. Quaid-e-Awam University Research Journal of Engineering Science & Technology, Nawabshah, Vol.1, No.2, July-December.
42. Pirzada G.B. and SAAND (1999), ‘Determination of Stochastic Characteristics of Concrete’, Mehran University Research Journal of Eng.: & Tech: Vol.18, No. 1, January.
43. Buller G.S., G.H. Wagan and SAAND (1999), ‘Evaluation of Conveyance Losses of Selected Lined Watercourse using Current Meter’. Mehran University Research Journal of Eng.: & Tech, Vol. 18, No. 1, January.
44. Wagan G.H., SAAND and G.S. Buller (1999), ‘Relation of Consumptive Use of Water to Certain Quantitative and Qualitative Characteristics of Cotton Crops’. Mehran University Research journal of Eng.: & Tech, Vol. 18, No. 1, January.
45. Wagan G.H., G.S. Buller and SAAND (1999), ‘Determination of Percolation Intensity (Ip) Coefficient of Rohri Canal from RD 631 to RD 640’. Mehran University Research Journal of Eng.: & Tech, Vol. 18, No. 3, July.
46. Wagan G.H., SAAND and G.S. Buller (1998), ‘Non-Cohesive Bank responds of River Indus to Water Waves at Moen-Jo-Daro R.D.16/3-23/0’. Mehran University Research Journal of Eng.: & Tech, Vol. 17, No. 2, April.
47. SAAND A., G.H. Wagan, and G.S. Buller (1997), ‘Evaluation of Conveyance Losses in 1 L Batho Unlined Watercourse’. Mehran University Research Journal of Eng., & Tech, Vol. 17, No. 1, January.
48. Pirzada G.B., M.M.H. Talpur and SAAND (1996), ‘Statistical Evaluation of the Strength of Reinforcing Steel Bars available in Local Market’. Mehran University Research Journal of Eng.: & Tech, Vol. 15, No. 1, January.

List of International Peer-review Conference Publications: 

49. Abdullah SAAND, M. Ismail & S. R. Sumadi (2012). Prepackaged Polymer-Modified Mortar as Modifier to concrete: A New approach to Produce Polymer-Modified Concreter. In Proc. 7thAsian symposium on Polymers in Concrete (ASPIC 2012). Istanbul Technical Univ., Istanbul, Turkey, pp. 501-508, ISBN 978-975-561-4274.

50. Abdullah SAAND, M. Ismail, S. R. Sumadi & M. U. K. Afridi, (2007). Load carrying Capacity of Pre-damaged RC Beams Repaired with Polymer-Modified Mortar. In Proc. 12thInternational Congress on Polymers in Concrete (12th ICPIC). Chuncheon, Korea, 27-28 September.
51. U.K. Afridi, SAAND Abdullah, M. Ismail, and S. R. Sumadi, (2007). Successful Usage of Pre-packaged Polymer-modified Cementitious Material in Efficiency Improvement and Rehabilitation of water Retaining Structures. In Proc. 12thInternational Congress on Polymers in Concrete (12th ICPIC). Chuncheon, Korea, 27-28 September.

52. Abdullah SAAND, M. Ismail, S. R. Sumadi and M. U. K. Afridi, (2006). Strength behaviour of Polymer-Modified Concrete using Prepackaged Polymer-Modified Mortar as an Additive. In Proc. Fifth Asian Symposium on Polymers in Concrete (5thASPIC’2006). SERC, Chennai, India, 11-12 September.

53. U. K. Afridi, A. G. Abbasi, G. B. Khaskhaili & Abdullah SAAND, (2006). Polymer-Modified Cement Systems Proved Successful in Resisting Earth Quake Jolts. In Proc. Fifth Asian Symposium on Polymers in Concrete (5thASPIC’2006). SERC, Chennai, India, 11-12 September.
54. Abdullah SAAND, M. Ismail, S. R. Sumadi & M. U. K. Afridi, (2006). Behaviour of Pre-damaged Reinforced Concrete Beams Repaired With Polymer-Modified Mortar. In Proc 10thEast Asia-Pacific Conference on Structural Engineering and Construction (EASEC-10). Bangkok, Thailand, 3-5 August.

55. Abdullah SAAND, M. Ismail, and S. R. Sumadi, (2006). Tensile Strength behaviour of Polymer-Modified Concrete made with PPMM as an Additive. In Proc. 2ndACF International Conference, Bali, Indonesia, 20-21 November.

Contact Information:
abdullah.saand@dsu.edu.pk

•  PhD (Transportation Sciences), Hasselt University, Belgium in 2018
•  MS (Transportation Sciences), Hasselt University, Belgium in 2015
•  BE (Civil Engineering), NED University, Karachi in 2011

Research Interests

•  Travel Demand Modelling
•  Crash investigation
•  Activity Based Demand Forecasting

Publications:

Baqueri, S.F.A., Adnan, M., Bellemans, T. and Janssens, D., (2019). Activity-based model for medium-sized cities considering external activity-travel: Enhancing FEATHERS framework. Future Generation Computer Systems. https://doi.org/10.1016/j.future.2019.01.055 Impact Factor: 4.64

Baqueri, S.F.A., Adnan, M., Bellemans, T. and Janssens, D., (2019). A Comprehensive Modeling Framework to Integrate External Trips in a Travel Demand Model. Journal of Computing in Civil Engineering. https://doi.org/10.1061/(ASCE)CP.1943-5487.0000817 Impact Factor:  2.30

Baqueri, S.F.A., Adnan, M. and Bellemans, T., (2018). Modeling External Trips: Review of Past Studies and Directions for Way Forward. Journal of Transportation Engineering, Part A: Systems, 144(9). Available at: http://ascelibrary.org/doi/10.1061/JTEPBS.0000179. Impact Factor:  0.90

Baqueri, S. F. A., Adnan, M., Knapen, L., Bellemans, T. and Janssens, D. (2018) ‘Modelling Distribution of External–Internal Trips and Its Intra-region and Inter-region Transferability’, Arabian Journal for Science and Engineering, accepted, doi: 10.1007/s13369-018-3482-x. Impact Factor: 1.09

Hussain I.; Khan M.A.; Baqueri S.F.A., Shah, S.A.R., Bashir, M.K., Khan, M.M., Khan, I.A., (2017). An Organizational-Based Model and Agent-Based Simulation for Co-Traveling at an Aggregate Level. Applied Sciences, 7(12), p.1221. Available at: http://www.mdpi.com/2076-3417/7/12/1221. Impact Factor:  1.689

Baqueri, S. F. A., Adnan, M., and Ali M. S., (2019) ‘Potential Of Integrated Bus Rapid Transit (BRT) System In Motorcycle Dominant Cities’, in 10^th International Civil Engineering Conference Karachi, Pakistan

Baqueri, S. F. A., Adnan, M., Kochan, B. and Bellemans, T. (2018) ‘Modeling residents external activity-travel in an activity-based model using FEATHERS’, in hEART Conference, Athens, Greece

Baqueri, S. F. A., Adnan, M., Knapen, L. and Bellemans, T. (2017) ‘Modelling External-Internal Trips at Traffic Analysis Zones Using Open-Source Data’, in Young Researchers Seminar. Berlin, Germany

Baqueri, S.F.A., Lee W. D., Knapen L., Bellemans T., Janssens D., Wetz G., 2016. Estimating Incoming Cross-border Trips Through Land Use data Resources – A Case of Karachi City, The 7th International Conference on Ambient Systems, Networks and Technologies (ANT 2016), Madrid, Spain

Baqueri, S.F.A., Ectors W., Ali M. S., Janssens D., 2016. Estimation of Value of Time for a Congested Network – A case study of the National Highway, Karachi, The 7th International Conference on Ambient Systems, Networks and Technologies (ANT 2016) Madrid, Spain

Ali M. S., Adnan M., Baqueri S.F.A., 2015. Toll Estimation as a function of Time-Dependent Link Cost, vehicle category and distance– A Case Study for Karachi, The 14^th International Conference on Traffic and Transportation Engineering, February 24-25, Tehran, Iran

Ali M. S., Adnan M., Noman S.M., Baqueri, S.F.A., 2013. Estimation of Traffic Congestion Cost-A Case Study of a Major Arterial in Karachi”, IEDC 2013, 4^th International Symposium on Infrastructure Engineering on Developing Countries, December 26-28, Karachi, Pakistan (Elsevier Journal)

Ali M. S., Adnan M., Baqueri S.F.A., 2012. “Development of a Socio-Economic Zoning System of the Karachi Metropolis for Effective Transportation Planning”, AWAM international Conference of Civil Engineering (AICCE), August 2012, Malaysia

Contact Information:

Email: fazal.abbas@dsu.edu.pk

• MSc. Civil Engineering, NED University of Engineering and Technology
• BSc. Civil Engineering NED University of Engineering and Technology

Highlights:

• 37 years of teaching experience
• Organized and attended more than 30 seminars conferences and workshops
• Completed training on Application of Computer in Civil Engineering Drawing at University Of Southampton UK

Selected Publications:

• Aspects of behaviour of CFRP reinforced concrete beams in bending, Construction and Building Materils, 2008
• Fire Resistance of carbon FRP reinforced concrete beams, Magazine of Concrete Research, 2007
• Experimental testing of concrete beams reinforced with carbon FRP bars, Journal of Composite Materials, 2007
• Analytical Modelling of concrete beams reinforced with carbon FRP bars, Journal of Composite Materials, 2007
• The use of CFRP bars as reinforcing material Part 1: Experimental study, Proceedings of Eighth International Conference on Computational Structures Technology, 2006

Contact Information:
Email: shsiddiqi@dsu.edu.pk

• ME (Water Resources Engineering), NED University
• BE (Civil Engineering), NED University

ME thesis Title “Regional Climate Model Evaluation for Lower Sindh”

Research Interests:

• Urban drainage and sewer system design
• Climate Change impacts on water resources
• Hydrologic Modeling for effective watershed management
• Best management practices in reducing contaminant transport in drinking water bodies

Contact Information:
Muhammad.ibrahim@dsu.edu.pk

• M.E Transportation Engineering, NED University
• B.E Civil Engineering, NED University

Contact Information:
syeda.wafa@dsu.edu.pk